Carriage handle/hardware
Classification:
Date:
1875-1950
Medium:
Steel
Dimensions:
Overall: 7 x 1 1/4 x 3 3/8 in. ( 17.8 x 3.2 x 8.6 cm )
Description:
Steel carriage handle with a rounded rectangular back plate, two holes to fasten at to and base; handle secured to the plate with a metal dowel and ball finial bolt in the center on the plate and soldered at the bottom; s-curve handle.
Object Number:
INV.720
Date Begin:
0
Date End:
1950
eMuseum Object ID:
33283
Due to ongoing research, information about this object is subject to change.
Stirrup
Classification:
Date:
1920-1940
Medium:
Steel
Dimensions:
Overall: 5 3/4 x 5 x 2 1/4 in. ( 14.6 x 12.7 x 5.7 cm )
Description:
Steel stirrup with a flat oval ring foot rest with three rings of stamped triangles on the top surface to prevent the foot from slipping; bow-shaped section with a rectangular hole in the top to attach it to the saddle by a stirrup strap.
Object Number:
INV.148
Marks:
stamped: on base: "VB NEVERRUST / ENGLAND"
Date Begin:
0
Date End:
1940
eMuseum Object ID:
33281
Due to ongoing research, information about this object is subject to change.
Stirrup
Classification:
Date:
1920-1940
Medium:
Steel
Dimensions:
Overall: 5 3/4 x 5 x 2 1/4 in. ( 14.6 x 12.7 x 5.7 cm )
Description:
Steel stirrup with a flat oval ring foot rest with three rings of stamped triangles on the top surface to prevent the foot from slipping; bow-shaped section with a rectangular hole in the top to attach it to the saddle by a stirrup strap.
Object Number:
INV.7563b
Marks:
stamped: on base: "VB NEVERRUST/ ENGLAND"
Date Begin:
0
Date End:
1940
eMuseum Object ID:
33280
Due to ongoing research, information about this object is subject to change.
Stirrup
Classification:
Date:
1920-1940
Medium:
Steel
Dimensions:
Overall: 5 1/4 x 4 1/2 x 1 3/4 in. ( 13.3 x 11.4 x 4.4 cm )
Description:
Steel stirrup with a flat oval ring foot rest with three rings of stamped triangles on the top surface to prevent the foot from slipping; bow-shaped section with a ovoid hole in the top to attach it to the saddle by a stirrup strap.
Object Number:
INV.7563a
Marks:
stamped: on base: "MARTIN & MARTIN/ LONDON/ NEW YORK/ &PHILA"
Date Begin:
0
Date End:
1940
eMuseum Object ID:
33279
Due to ongoing research, information about this object is subject to change.
Stirrup
Classification:
Date:
1920-1940
Medium:
Steel
Dimensions:
Overall: 5 x 4 3/8 x 1 7/8 in. ( 12.7 x 11.1 x 4.8 cm )
Description:
Steel stirrup with a flat oval ring foot rest with three rings of stamped triangles on the top surface to prevent the foot from slipping; bow-shaped section with a rectangular hole in the top to attach it to the saddle by a stirrup strap.
Credit Line:
Gift of Mrs. Walter Jennings
Object Number:
INV.847b
Marks:
stamped: on base: "MARTIN & MARTIN/ LONDON/ NEW YORK & PHILA"
Date Begin:
0
Date End:
1940
eMuseum Object ID:
33278
Due to ongoing research, information about this object is subject to change.
Harness bit
Classification:
Date:
1875-1950
Medium:
Steel
Dimensions:
Overall: 2 x 5 1/4 x 7 1/4 in. ( 5.1 x 13.3 x 18.4 cm )
Description:
Steel u-shaped harness bit attached to side bars that are straight in the front with loop ends and scrolled at the back with fleur-de-lys finials at one end and rings to attach the harness straps to at the other end.
Credit Line:
Gift of Mrs. Walter Jennings
Object Number:
INV.869
Marks:
stamped: on side bars: "HORTON & SONS/ STEEL"
Date Begin:
0
Date End:
1950
eMuseum Object ID:
33254
Due to ongoing research, information about this object is subject to change.
Watering bit
Classification:
Date:
1875-1950
Medium:
Steel
Dimensions:
Overall: 7 1/4 x 11 1/2 x 1 in. ( 18.4 x 29.2 x 2.5 cm )
Description:
Steel snaffle watering bit with eight wide steel beads around the bit and two loops forming the joint in the center; two rings on rods with ball ends attach to the bit ends.
Credit Line:
Gift of Mrs. Walter Jennings
Object Number:
INV.894
Marks:
stamped: on side bars: "DANIEL/ TRADE MARK"
Date Begin:
0
Date End:
1950
eMuseum Object ID:
33252
Due to ongoing research, information about this object is subject to change.
Harness bit
Classification:
Date:
1875-1950
Medium:
Steel
Dimensions:
Overall: 2 1/2 x 7 x 8 3/4 in. ( 6.4 x 17.8 x 22.2 cm )
Description:
Steel pelham harness bit; cylindrical bit with a cuff in the center and bulbous ends fitted onto stepped fittings with a loop at the front, an archover the bit ends and two rectangular holes cut out in the sides to which the reins or harness are attached; front loops have hooks attached.
Credit Line:
Gift of Mrs. Walter Jennings
Object Number:
INV.873
Marks:
stamped: on side bars: "CROSS & Co./ DANIEL/ DANIEL/ TRADE * MARK"
Date Begin:
0
Date End:
1950
eMuseum Object ID:
33248
Due to ongoing research, information about this object is subject to change.
Stirrup
Classification:
Date:
1920-1940
Medium:
Steel
Dimensions:
Overall: 5 1/4 x 4 3/8 x 1 7/8 in. ( 13.3 x 11.1 x 4.8 cm )
Description:
Steel stirrup with a flat oval ring foot rest with three rings of stamped triangles on the top surface to prevent the foot from slipping; bow-shaped section with a rectangular hole in the top to attach it to the saddle by a stirrup strap.
Credit Line:
Gift of Mrs. Walter Jennings
Object Number:
INV.847a
Marks:
stamped: on base: "V. B. & Co FORGED/ BRITISH"
Date Begin:
0
Date End:
1940
eMuseum Object ID:
33247
Due to ongoing research, information about this object is subject to change.
Stirrups (pair)
Classification:
Date:
1875-1925
Medium:
Steel
Dimensions:
each overall: 5 1/2 x 4 3/4 x 2 in. ( 14 x 12.1 x 5.1 cm )
Description:
Steel stirrups with a flat foot rest with five rings of stamped triangles on the top surface to prevent the foot from slipping; bow-shaped section with a ovoid hole in the top to attach it to the saddle by a stirrup strap.
Credit Line:
Gift of Mrs. Walter Jennings
Object Number:
INV.846ab
Marks:
stamped: on bases: "W. B. & L. S."
Date Begin:
0
Date End:
1925
eMuseum Object ID:
33246
Due to ongoing research, information about this object is subject to change.
Pages
